PCamMMS
CAM for all CNC measure machine programming. The increase in demand for small batches of very accurate and precise parts increases the need to measure parts produced easily and efficiently. The measurement department is usually considered the most expensive of the entire production cycle. PCamMMS measurement software optimizes the measurement process, allowing the customer to remain efficient and competitive. With the PCamMMS, the measurement is reduced to the definition of measurement points on the solid, leaving all the measurement management to the software. Features of PCamMMS software:
- Windows graphical user interface.
- Import of STEP solids and visual CAD programming of measurement cycles.
- Flexibility and ease of use.
- Unique structure for geometric programs and surfaces.
- Algorithms certified by international institutes of metrology.
- Graphical representation of the controlled elements.
- Graphical representation of errors.
- Operator dialogue and report generation.
- Automatic selection of electrodes and work-pieces for erosion.

Link Werth
Systemvoraussetzungen:
- Messprogramm WinWerth ab Version 7.30
- WinWerth Benutzerverwaltung ( Art.: 97.1009 oder 97.1209)
Die Kommunikation von Ihrem Prozessleitsystem (z.B. Software PCam) zur Messsoftware findet über die Datei „RemoteControl.ini“ statt.
Mit folgenden Einträgen in der RemoteControl.ini wird das Messprogramm definiert:
[Command]
Dmisfile = d:\Data\wwData\DMIS\grafik.dms ; DMIS-Datei
Dtbfile = ; Vorlauf, wenn gewünscht
Protfile = ; Protokollausgabe in Datei
DMIS starten mit folgendem Eintrag in remotecontrol.ini:
[status]
Runnext = 1
Wenn das DMIS fertig abgearbeitet ist, wird folgender Eintrag in remotecontrol.ini gesetzt:
[status]
Finished = 1
Soll die DMIS-Abarbeitung unterbrochen werden, muss folgender Eintrag in remotecontrol.ini gesetzt werden:
[status]
Stop = 1

PCamMMS Intro
CMM programming is one of the bottlenecks of the production process. The increase in demand for small batches of very accurate and precise parts increases the need to measure parts produced easily and efficiently.The measurement department is usually considered the most expensive of the entire production cycle.The PCamMMS measurement software optimizes the measurement process allowing the customer to remain efficient and competitive.With the PCamMMS software the measurement is reduced to defining the measurement points on the solid, leaving all the measurement management to the PCamMMS. Features of PCam MMS software:
- Windows graphical user interface.
- Import of STEP solids and visual CAD programming of measurement cycles.
- Flexibility and ease of use..
- Unique structure for geometric programs and surfaces.
- Algorithms certified by international institutes of metrology.
- Graphical representation of the controlled elements.
- Graphical representation of errors.
- Operator dialogue and report generation.
- Automatic selection of electrodes and workpieces for erosion.

Vision PreSet

EPS Electrode Pre Set
- Module to manually or automatically preset an electrode on the CMM. Independent of the type of CMM.

EQC Electrode Quality Control
- Module for automatic electrodes quality control with integrated wear management.
- Electrode dimensional control and comparison: given the points to be controlled, based on the specifications, the module performs the automatic quality control of the electrode on the CMM.

WPS Workpiece Pre Set
- Module to manually or automatically preset a workpieces on the CMM. Independent of the type of CMM.

WQC Workpiece Quality Control
- Module to process the points defined on the solid of the workpiece and, based on the diameter of the probe, automatically discard those points that cannot be reached. It then generates the measurement program that the CMM will have to run to measure all the required points.

Gap
- Based on the preset measurement, the real gap is automatically calculated on the electrode base, and the technology for the machine is dynamically modified in order to optimize erosion.

WGL Export
- Export the geometry in 3D HTML5 format.

Report
- Module to obtain a measurement report in PDF, HTML, RTF, XLS, CSV, TXT format that can be sent via email.Contains the image of the measured element with the values within tolerance and out of tolerance.

CMM Simul
- Simulation of measurement cycles.

Metrosoft Link
- Metrosoft QUARTIS measurement data reading module.

Calypso Link
- Calypso measurement data reading module.

PCDmis Link
- PCDmis measurement data reading module.

MCOSMOS Link
- MCOSMOS measurement data reading module.

Arcocad Link
- Arcocad measurement data reading module.

USoft
- Module for management of USoft measurement cycle.

Mitutoyo CNC
- Module for management of Mitutoyo measurement cycle.

Pantec CNC
- Module for management of Pantec measurement cycle.

Zeiss CMM-OS
- Module for management of Zeiss measurement cycle.

I++
- Module for management of I ++ measurement cycle.

Renishaw UCC
- Module for management of UCC measurement cycle.

Hexagon CNC
- Module for management of Hexagon measurement cycle.

Deva CNC
- Module for management of Deva measurement cycle.

Coord3 CNC
- Module for management of Coord3 measurement cycle.
